Translate

2016年9月14日星期三

Up to 25% Off All Modules for Mid-Autumn Festival Celebration

2016年9月13日星期二

Review ESP8266 WiFi Witty Cloud Dev Board

ESP8266 WIFI Witty Cloud Development Board ESP-12F Module MINI Nodemcu

Description:
1. This cheap and small Wifi transciever is the perfect solution for
home Automation and IoT applications. It can be the replacement of your
NRF24L01, it can talk to your Wifi router directly through the UART
MCU's (Rx, Tx).
2. The ESP-12 module is one of the most complete of the ESP family as
it allows you to use biggest amount of pins of all of them. You can
program this module to work stand alone with the Arduino IDE or with LUA
as NodeMCU.
3. It has an LDR and a WS2812 led already on board for your projects.
The board comes with a CH40 micro USB module to program it.
4. The ESP8266 highly integrated chip, including antenna switch balun,
power management converter, so with minimal external circuitry. The
system is equipped with ESP8266 manifested leading features are: energy
saving VoIP quickly switch between the sleep / wake patterns, with
low-power operation adaptive radio bias, front-end signal processing
functions.
5. This version, the ESP8266-03 is one of the smallest versions of this module. It includes a buil-in ceramic antenna.
Specifications:
1. LDR Lignt Sensor on board
2. WS2812 Led on board
3. 3x tactile buttons (1x in the Witty board and 2x in theCH340 board)
4. Supports 3 modes: AP,STA,AP+STA
5. Dimensions: 24mm x 16mm
6. Micro USB connection for power and/or programming

2016年9月9日星期五

Arduino: Sensor de sonido (KY-037 y KY-038 37in1 kit)



LM393 Voice Sound Sensor for Arduino

Specifications 

Size: 32mm (L)*17mm(W)*15mm(H)

Main chip: LM393, Electret condenser microphone

Working voltage: DC 4-6V


Features

  • Signal output indication

  • Single channel signal output

  • The output effective signal is low level

  • When there is sound,outputs low level and the signal light

  • Can
    be used for Acoustic control light , give sound and light alarm working
    with Photosensitive sensor ,and sound control,sound detect

  • Circuit board output switch quantity

  • Reference routines, circuit diagram and detailed specification will be provided after perchase.

2016年9月8日星期四

NodeMCU (esp8266 development board) VIDEOREVIEW ICStation



Enjoy Video from our customer Lius. 

NodeMCU (esp8266 development board) VIDEOREVIEW



Description:

The Development Kit based on ESP8266,integates GPIO,PWM,IIC, 1-Wire and ADC all in one board.

Power your development in the fast way combinating with NodeMcu Firmware

View more about this Lua Nodemcu WIFI Network Development Board Here 

2016年9月7日星期三

Unboxing the MP3 Voice Module U Disk Audio Player Micro SD from ICStatio...



Unboxing the MP3 Voice Module U Disk Audio Player Micro SD from ICStation com

Lets looking forward to the updation Video soon 

Description:
Volatge:3.3V-5V
Size:21*21mm


Coupon Code: ICICS , Discount Amount: 10%
Max Use: 1 (one for per customer)
No Min Order
Started Date:7th September,2016
Ended Date:7th November,2016

2016年9月6日星期二

AD7606 DATA Acquisition Module 200Ksps 16Bits review

Enojy Boian'review about this AD7606 DATA Acquisition Module 200Ksps 16Bits
Find more product deatails here; and view Boian's project here

1) Description
1. using high-precision 16-bit ADC chip AD7606
2. 8 analog inputs. 1M ohm impedance. [No negative supply, there is no front-end analog amplifier 

can be connected directly to the sensor output]
3. the input range of plus or minus 5V, plus or minus 10V. By IO control.
4. Resolution 16.
5. the maximum sampling frequency sampling rate of 200ksps. Supports eight sampling settings file 

(which can effectively reduce the jitter)
6. built-in benchmark
7. a single 5V power supply
8. SPI Interface, or 16-bit bus interface. Interface IO level can be 5V or 3.3V.

    We AD7606 module factory default is 8080 parallel interface.
    If SPI interface mode, you need to modify R1 R2 resistor configuration.
    Parallel Mode Jumper: R1 floating (not stickers), R2 10K resistor paste
    SPI interface mode jumper: R1 stickers 10K resistor, R2 floating (not stickers)
    AD7606 configuration is very simple, it has no internal registers. Range and over-sampling parameters 

are controlled via an external IO.
    Pulse frequency sampling rate provided by the microcontroller or DSP control.
    AD7606 must use a single 5V supply.
    Level communication interface between the AD7606 and SCM controlled by VIO pin. 

That VIO power supply must be connected to the microcontroller can be 3.3V can also be 5V.

2) Boian Review details
The module has configuration resistors for this:




















The next step is to start connecting the module to Arduino. Since I will need 16 pins just for the data, and I still need to connect Reset, CS, RD and few others, I decided to use Arduino Mega. I have an Ethernet Shield installed on my Mega for other developments, and testing, so I decided to leave the shield in place for the experiment. Here is the result:















To start measurement, you need to set the Convst A and Convst B to low. 
The 2 signals can be set at different time:








3) Product Images




2016年9月5日星期一

Humedad y temperatura con Arduino y SI7021



Introduction about this 

Specifications
1. Operating voltage: 1.9-3.6V (recommended 3.3V)
2. Standby current: 60nA
3. Temperature range: -40 - 85 ℃ (Recommended -10 - 60 ℃)
4. Temperature accuracy: ± 0.4 ℃ (-10 - 85 ℃)
5. Humidity range: 0-100% RH (recommended 20% - 80% RH)
6. Humidity Accuracy: ± 3% RH (0-80% RH)
7. Temperature conversion time: 7ms
8. Humidity conversion time: 17ms (temperature conversion will occur automatically when the humidity conversion)
9. Interface Type: I2C 2.54mm pad pitch
10. Module size: 8.5*10mm

If we look atthe module IcStation carefully we see that already included on the plate the 
two resistors, so it is not necessary to include them on our own and also includes 
capacitor 0.1 uF you need integrated between Vcc and GND to stabilize its feeding.


















 
Look what RincónIngenieril share with us: 
















Application:
1. Assets and asset tracking
2. Auto climate control and defogging
3. Baby Monitors
4. Continuous Positive Airway Pressure (CPAP) machine
5. Flooding and water detector
6. Gas, fire and smoke detectors
7. Mobile / Smart Phone
8. Industrial HVAC / R
9. Notebook / Tablet PC
10. laser printer
11. Microenvironment / Data Center
12. PLC and IO Modules
13. Remote telemetry device
14. tablet
15. Test and Measurement
16. Thermostat / humidistat
17. Ventilation and air conditioning systems
18. Stations
19. Wind Power Inverter
20. Windshield and mirror system
21. The radio base station
22. Wireless sensor networks


2016年9月4日星期日

USB Charger Doctor & 400 kV Step Up Converter



Blue USB Current Tester Detector Ampere Meter 3.5V-7V 0A-3A

Description
Basic parameters:

Name :USB current voltage detector
measuring accuracy :1%
Update Frequency :About 200 ms
Program Display :Alternating current voltage
Voltage measurement range:3.5V-7V
Current measurement range:0A-3A
working current :20mA

COLOUR :Blue
Storage Temperature :- 10 ℃ to + 65 ℃
The pressure drop of the electric meter:200mV
weight:15.4g
overall dimension :52*20*15

IC Station Header Conversion Board for SMD Radio Modules



Enjoy Video from ICStation Customer and hope you like it. 
In this video we take a look at a pin header conversion board which is very useful when you want to prototype a circuit which uses SMD radio modules.

The header conversion board can be found here: goo.gl/GXUWTh
$0.99* 10pcs Buy More Save More Good Chance!
You can also get the SMD NRF24L01 radio modules: goo.gl/Fl1Rll
$2.99 now with 18% Off Free Shipping 






Description
  • NRF24L01+ wireless module
  • 2Mbit/s 1Mbit/s 250Kbit/s transfer rate options
  • MultiCeiver hardware to provide the 6 receiver functions at the same time
  • +/- 60ppm crystal
  • Only need an external inductance when match antenna
  • No multi-layer PCB
  • 5V input tolerance level
  • No need external level converter
  • Improved ShockBurst and serial interface can be easily connected with a variety of low-cost MCU
  • No MCU with SPI Interface
  • 20 pin 4x4mm QFN leadless package very few external components
  • The 2Mbit/s rate when the peak current 12.5mA received
  • The 2Mbit/s rate @ 0dBm output current of 11mA peak
  • 2Mbit/s rate of only a small average current
  • 400nA Power-down mode, power consumption
  • Power consumption of 32uA in standby mode
  • 130us fast switching and wake-up time
  • With on-chip voltage regulator oltage regulators
  • In the 1.9 to 3.6V low voltage operation
  • Possible to reduce noise
Application
Mouse, keyboard, wireless headsets, intelligent sports equipment, remote controls, 
voice applications, security devices, VOIP applications.

Circuit Diagram




2016年9月3日星期六

GPRS GSM Module A6



GPRS GSM Module A6 Minimum System Voice Messaging Development Board

Save Extra 6% OFF when you get them together :) 

 +                    
                                                     
Module specificationDimensions 22.8 × 16.8 × 2.5mm;Operating temperature -30 ℃ to + 80 ℃;Operating Voltage 3.3V-4.2V;Power voltage> 3.4V;Stand by average current 3ma less;Support for GSM / GPRS four bands, including 850,900,1800,1900MHZ;GPRS Class 10;Sensitivity <-105;

Support voice calls;Support SMS text messaging;Support GPRS data traffic, the maximum data rate, download 85.6Kbps, upload 42.8Kbps;Supports standard GSM07.07,07.05 AT commands and extended commands Ai Thinker;
It supports two serial ports, a serial port to download an AT command port;AT command supports the standard AT and TCP / IP command interface;Supports digital audio and analog audio support for HR, FR, EFR, AMR speech coding;Support ROHS, FCC, CE, CTA certification;SMT 42PIN package

Enjoy some pictures about this board!




Electronics Calculator Kit Build

1.Introduction:   ICStation Multi-functional Calculator DIY  Kit is powered by two CR2032 button batteries, integrates five different comput...