Installation of Bluetooth Multi-Function Smart Car for Arduino Controlled By Mobile Phone

You want to make a smart car? Don't know where to start? How about learning with ICStation team.
The Arduino Bluetooth Smart Car has the function of Complete tracking, obstacle avoidance, infrared remote control and Bluetooth remote control. It is a MCU study and application development system base on Atmege328.The greatest feature is that you can control it with Mobile phone bluetooth of Android system. That’s may have a lot of fun.To make it, you need a number of kits which contain a number of interesting programs, and expand external circuit module to implement functions.
So now let's begin to build this smart car.
Major Parameter:
　　1>.Motor parameter:
　　      Power apply:6V-9V;
　　      Reduction gear ratio:1:48;
　　2>.Selection L298N module driver motor,segregate form CPU.
　　3>.Three tracking modules,detection white and black line.Available with fall prevention control.
　　4>.Infrared remote communication module,composition of remote control system of smart car.
　　5>.Bluetooth wireless module,can match with mobile phone to control smart car.
　　6>.Input voltage 7V-12V,can connect to different kinds of sensor.The more sensors ,the more functions.
　　 Components:
　　1>.stepper motor  x4
　　2>.wheel  x4
　　3>.motor fixed block  x4
　　4>.100x213x5mm perspex sheet  x1
　　5>.100x213x5mm perspex sheet  x1
　　6>.L298N driver board  x1
　　7>.Arduino uno 328 controller  x1
　　8>.Arduino sensor shield V5  x1
　　9>.PTZ  x1
　　10>.Servo motor  x1
　　11>.Ultrasonic module  x1
　　12>.Three channel tracking module  x1
　　13>.Infrared receive sensor  x1
　　14>.Transducer  x1
　　15>.18650 battery holder  x1
　　16>.18650 battery  x2
　　17>.18650 battery charger  x1
　　18>.Bluetooth module  x1
　　19>.Dupont wire  x30
　　20>.USB cable 1M  x1
       21>.Copper cylinder M3*20mm x3
　　22>.Copper cylinder M3*35mm  x6
　　23>.Copper cylinder M3*20mm  x3
　　24>.Copper cylinder M3*6mm  x6
　　25>.M3 3mm screw and nut
　　 Outline:
1.PTZ and servo motor Installation

2.Ultrasonic Installation

3.Car Chassis

4.Introduction of L298N motor driver module, Tracking module principle, Ultrasonic obstacle avoidance intelligent car, Mobile phone bluetooth intelligent car



The code for reference:
http://www.icstation.com/ebay/IC/All%20data%20modules/2529.zip
　　
Thank you for your visiting! Please feel free to share us your comments. :)

Should you meet any problem, please feel free to contact us.

ICStation Team

DIY LED Sign with MAX7219 Dot Matrix Module STM8S003F3 MCU

To satisfy electronic DIY hobbyists, ICStation has developed MAX7219 Dot Matrix Module. It uses the Max7219 chip which do a great job on saving of MCU I/O. It can not only control each point individually, but also can be extended without limitation to meet your requirements on LED Sign, Team Logo and so on.
What's more, it's controlled by the STM8S003F3 MCU with 1K data storge space which is low cost, low power consumption, very powerful.

Major Building Portions of the electronic DIY kits:
1. The 16pcs of MAX7219 Dot Matrix Kits are ready
2. Decomposition the pin header
3. Welding the SMD and max7219 Chip
4. Welding the electrolytic capacitor
5. Welding the pin header
6. Assembling the PCB
7. Setup the Dot Matrix
8. Wire Connection
9. Power the Dot Matrix and testing with our Code
Components & Tools
Main chip: MAX7219
MCU:  STM8S003F3
Tools: Soldering Iron Tweezer Power Module STM8S003F3P6 Development Board ST-Link Dupont Line Copper Wire Electrician Glue Soldering Wire Pin Header

Follow the steps via http://www.instructables.com/id/DIY-LED-Sign-with-MAX7219-Dot-Matrix-Module-STM8S0/ to build you own sign and logo.

ICStation.com review CP2102 adapter and 3amp dc dc buck regulator

For Sharing: TouchSynth

TouchSynth – A high school senior project

This project uses an Arduino Mega, a resistive touchpad, and an 8×8 LED matrix to create a simple digital audio workstation and synthesizer. You can compose and play songs in real time and use different types of sounds. It was a nine month process between me and my partner during our senior year of high school to create this. The result is a really nifty Arduino project that showcases the flexibility of Arduino devices, and it sounds good as well!

Get 1602A HD44780 Character LCD with $1.99

ICStation Christmas Big Promotion! $1.99+FREE SHIPPING 


1602A HD44780 Character LCD just cost $1.99, which original price is $2.98. 
This price is valid just for one week. 
Only 50 PCS left!

Rush to buy now!!!

New Arrivals: Digital Power Amplifier Module, Sensor Modules

TA2024 Digital Amplifier Module 15W+15W HIFI Digital Amplifier

   

Precautions Amplifier
1. More power to 12V Current 3A
2. Speaker is best to use an impedance of 4 ohms, some of the high sensitivity,
3. For some relatively low signal level sources, to add effects to play the preamplifier
4. Note that the positive and negative can not be reversed, use power supply

HX711 Module Weighing Sensor Pressure Sensor 24Bit AD Module

 

 The module uses 24 high-precision A / D converter chip hx711 and is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128. The input circuit can be configured to provide an electrical bridge the bridge voltage (e.g., pressure, weight) sensor mode.

12V 1 Channel Wireless Remote Control 1 Relay Module 315MHZ

 

Feature
1. Receiver can match multiple keys remote control.
2. Size:35*32*19mm
3. User can modify work mode:self-locking, interlock, inching

Basic Parameters
Model : KGS-B10
Working voltage : DC12V
Operating Frequency : 315MHZ
Contact capacity : ≤10A/250VAC; 10A/30VDC
Receiver sensitivity :>-105dB
Remote distance :200 meters (open area without interference) This distance is open area and non-interference in the theoretical distance.The actual distance is only 10% to 50% by environmental disturbance

Work Mode
self-locking/interlocking/inching. users freedom of choice. (Welding T is self-locking.Welding M is inching type. M and T are not welded into interlocking type) 

SUPRISE! ICStation $0.99+FREE SHIPPING LOSS SALE!

DC-DC LM2596 Low Ripple Power Supply just cost $0.99, which original price is $1.98.

• Discount is up to 50%.
• This price is valid just for one week. 
• Only 50 pieces remaining!

Testing the Keyes IR Sensor Module with Arduino

TB6560 Stepper Motor Controller from ICStation: Review and Impressions

ICStation 16% OFF Coupon Code for Your Feedback

Dear Customer,

We're launching a new column "Engineering Service" and introduce our Developed Modules, New Services and Technical Strength. We would like to obtain your honest feedback to meet your satisfaction on the product development.

Take 2 minutes to complete the survey and get 16% OFF coupon code before 22nd, Dec. We appreciate your help and suggestions. .:)
START NOW:  https://www.surveymonkey.com/s/KMJ6CQD
* Coupon Code will be emailed to you in 2 working days after we get your feedback.

We wish you a happy holiday season!
Should you have any unclear, please feel free to let us know at orders@icstation.com.

Best regards,
ICStation Team

ICStation Engineering Service

Dear All,


We're really pleased to share all you here that our new column "Engineering Service" is launched now.

 "Making Easier Possible", ICStation with this aim is providing worldwide with IC end products, Design & Engineering Services, Production & Processing Service

and developing digital and analog circuit design which based on the STM8/AVR/Arduino platforms. 


To get cheap but high quality items such as Modules, Arduino module and shield, Robot & Parts, Development Board, DIY PCB Universal Board, IC accessories and so on, please go to our website now.


To enjoy our new service, of PCB/Programmer, please kindly submit your inquiry.
 


Best regards,
ICStation Team

New Arrivals: Electronic DIY Kits, Power Supply Module, Sensor Module

Shake Stick Suite Flash Stick AT89S52 DIY Kit Magic Wand

   

• Use USB ASP to Update Programmer Directly
• Design Smile Face / Warm Heart Pattern and "LOVE" character by this magic wand

L7809 Step Down 12V-35V to 9V DIY Kit Power Supply Module

 

• Step down power module
• Input volt:12V-35V
• Output volt:9V
• output current:1.5A(MAX)

Digital Thermal Sensor Module Temperature Sensor Module for Arduino

 Module Features

• Using the NTC thermistor sensor , good sensitivity
• The comparator output signal clean waveform is good , driving ability, than 15mA.
• Adjust the temperature distribution bit detection threshold
• Working voltage 3.3V-5V
• The output format : Digital switching output (0 and 1)
• With bolt holes for easy installation
• A small board PCB size : 3.2cm x 1.4cm
• Using a wide voltage LM393 comparator

www.ICStation.com Wish All You Merry Christmas

The Biggest Offer for Christmas

Up to 50% Off on Electronic DIY Gifts and Decorations

• DIY Christmas Gifts for Your Kids & Friends  
• Decoration for Christmas 
• LED Modules
• Christmas Gift

  ---

  If your order has met below requirements, a freebie will be shipped with your order.
  
• The total price is up to $40, get a LM358 Breathe light DIY Kit FOR FREE.
• The total price is up to $80, get a MAX7219 Dot Matrix MCU Control Display Module FOR FREE.

 

New Arrival: STC C51 MCU Minimum System Development Board

STC C51 MCU Minimum System Development Board (NO Chip)

 

1. Crystal oscillator:11.0592mhz(default).
2. DC-005 power socket 5.5x2.1mm.
3. Size:4.1x8.9cm.
4. Support chip:STC89C52 STC12C5A60S2 STC11/10x series.
5. ISP and serial port download interface.
6. P0 port with pull-up resistor.

NOTE
This minimum system development board without C51 chip and power supply cable and downloader,you need purchase for chip in additional!!!!

STC C51 Minimum System Development Board STC89C52 (NO Chip)

 

1. Crystal oscillator:11.0592mhz
2. DC-005 power socket 5.5x2.1mm
3. Size:6.5x3.1cm
4. Support chip:STC89C52 STC12C5A60S2 STC11/10x series

NOTE
This minimum system development board without C51 chip and power supply cable and downloader,you need purchase for chip in additional!!!!

 

11.11 Shopping Carnival: 11% Off on Whole Store, 3 Days ONLY

Funduino Mega 2560 ATmega2560-16AU Board (Arduino-compatible) 433Mhz RF Transmitter and Receiver Kit for Arduino Project For Arduino Ultrasonic Module HC-SR04 Distance Transducer Sensor Infrared Wireless Remote Control Kits for Arduino AVR PIC $16.25 + Free Shipping $1.6 + Free Shipping $2.13 + Free Shipping $3.34 + Free Shipping   5V Mini USB 1A Lithium Battery Charging Board Charger Module HC-SR501 Human Sensor Module Pyroelectric Infrared TEC1 12706 Thermoelectric Cooler Peltier 12V 60W 92W  USB 2.0 to TTL UART 6 PIN Serial Converter CP2102 STC PRGMR $1.26 + Free Shipping $1.98 + Free Shipping $3.12 + Free Shipping $2.31 + Free Shipping   New Motor Drive Shield Expansion Board L293D for Arduino TowerPro SG90 9G Micro Servo Motor RC Robot Helicopter Control 1602A HD44780 Character LCD Display Module LCM Blue Backlight AD9850 DDS Signal Generator Module $4.85 + Free Shipping $3.19 + Free Shipping $2.57 + Free Shipping $4.36 + Free Shipping   Solder Sucker Desoldering Tool Removal Vacuum MB102 Breadboard Power Supply Module 3.3V/5V For Arduino Board MAX7219 Dot Matrix MCU Control Display Module DIY Kit for Arduino DC 4.5-30V 0-50A Dual LED Digital Volt Meter Ammeter AMP Power $2.49 + Free Shipping $2.36 + Free Shipping $3.55 + Free Shipping $7.79 + Free Shipping Three ways for clients of www.ICStation.com to get freebie 1) Rate Us on Review Websites 2) Share Puchasing Experience on Product Page 3) Make/ Share Video of Purchased ICStation Products Check the details   If you do not want to receive email from us in future, please click here. We apologize if there is any inconvenience caused.

Best Seller & Hot Deal: Infrared Save Energy Motion Sensor Automatic Light Lamp Switch

1. Product Features

• Wide operating voltage: AC110V - 250V.
• Way system:Two lines, the the ordinary manual switch connection
• Then ordinary inductive switch then can not load: energy saving lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps (inductive with QiHuiQi), electronic fluorescent ring lamps, T5 lamp, spotlights, transformers, small electrical appliances, solenoid valve, mixed load (a variety of different load together) all kinds of load!
• The extra-wide delay time adjustment: about 10 seconds - 6 minutes adjustable!
• Adjustable sensitivity: turn on the lights during the day or night, and are free to choose
• Effectively prevent power fluctuations, electromagnetic interference, more stable performance, to avoid a switch to other appliances as well as cell phone signals and other electromagnetic interference caused by incorrect switch lamps, more energy efficient and extend lamp life!
• Lightning protection function: Ad Hoc lightning protection devices, which can effectively prevent the damage caused by the thunder and lightning and other high-voltage transient switch.

2. Electrical parameters

• Operating voltage: 110V-250V
• Load power: 1W to 200W. (Inductive loads, such as LED lights, energy saving lamps, fluorescent lamps, maximum load power 100W)
• Delay time: 6 minutes 10 seconds adjustable.
• Sensing distance of 0-7 meters (have a direct relationship with the installation).
• Induction angle degrees :110-140 (mounted with a direct relationship).
• Connection: single-wire system (two lines, the ordinary manual switch wiring Needless cloth one line, without any peripheral accessories, save money trouble).
• Load types: energy saving lamps, incandescent lamps (bulbs), LED lamps, electronic fluorescent ring lamps, T5 lamp, spotlights, transformers, small electrical solenoid valve, mixed load (a variety of different load together) and all kinds of load!
• Application areas: hallway, corridor, bathroom, basement, warehouse, garage and other places of automatic lighting, automatic control functions of automatic ventilation exhaust fan and other appliances, as well as for anti-theft purposes

New Arrivals: 2000W SCR Motor Speed Controller, 12V-36V 5A Pulse Width Modulation PWM DC Motor

2000W SCR Motor Speed Controller Voltage Regulator Module

Parameters:
Operation Voltage: AC 220V
Max Power: 2000W
Voltage Regulation: AC 50-220V
Size: high temperature FR-4 circuit board
How to use: put this product in series with the lamp or electrical circuit.

 

12V-36V 5A Pulse Width Modulation PWM DC Motor Speed Control Switch

 

PWM DC speed regulator description:
1) Working voltage: DC12V-DC36V
2) Control current: Rated 5A, 10A maximum current at moment
3) Control Power: Voltage*Current = Power (the power is 12V*10A=120W when voltage=12V. the maximum power 200W when voltage is maximum)
4) Size: 60mm*40mm.
5) Frequency: 25KHZ

Best Seller: White Solderless Prototype Breadboard 170 Tie-points for Arduino

 

Product Features

• Mini Solderless Breadboard
• 1 Terminal Strip
• Tie-point 170
• ABS plastic material
• Completely reusable
• Coloured coordinates for easy component placement
• Phosphor bronze nickel plated spring clips
• Accepts a variety of wire sizes (29-20 AWG)
• Dimensions: 45x34.5x8.5mm
• Color: White

Related Products

• Prototype Shield Mini Breadboard For Arduino UNO R3
• 700 Point Solderless PCB Breadboard SYB-120 + Jump Wire 
• 6 Mini XF-25 Breadboard with 1 Base Board
• 65pcs Breadboard Plug Wire Cable Tire   

Best Seller: $2.17 Antistatic Non-magnetic Straight Tip Tweezer TU-10B

A range of high quality stainless steel tweezers, designed to meet the requirements of the electronics and precision engineering industries.

The tweezers are made of metal and have sharp tips. Do not mistreat themior handle them in any way that may cause injury or damage. When working on electrical appliances, always be sure to first unplug the appliance in order to prevent electrical shock.

Material: Anti-Magnetic Anti-Acid steel

Model: TU-10B

Size: 125x10mm or 4.92x0.39"

NOTE:The tweezer forhead is sharp. Please be careful when using it
Please put it out of the reach of children.

Related Products

• Hollow Needles Desoldering Tool for Electronic Components 
• Glass LED Lamp Light Magnifier for Reading/Surgery 9157-3 w/ 3 L 
• Solder Sucker Desoldering Tool Removal Vacuum 
• Anti-static Cordless Wrist Strap ST-801 
• BEST 168Z Maintenance of Fixed Shelf Desktop Magnifier

New Arrivals: Digital Multimeters,Insulation Resistance Tester, 3 in 1 Moisture/Light/PH Meter

UNI-T Palm Size Digital Multimeters UT-33B

 

The Model UT33B, UT33C and UT33D Multimeters (hereafter referred as "the Meter") are 3 1/2 digits with steady operations, fashionable design and highly reliable hand-held measuring instrument.
The Meter can measure AC/DC voltage, AC/DC Current, Resistance, Temperature, Diode and Continuity.
It is an ideal tool for maintenance.

• DC Voltage:200mV/2000mV/20V/200V/500V
• AC Voltage:200V/500V
• DC Current:20mA/200mA/10A
• Resistance:200W/2000W/20KW/200KW/20MW
• Display Backlight:Yes
• Low Battery Display:Yes
• Power:9V Battery (6F 22)
• LCD Size:47*15mm, or 1.85*0.59in
• Multimeter Size:133*75*35mm, or 5.24*2.95*1.38in
• Net Weight:250g, or 8.82oz

Digital Insulation Resistance Tester DY30-2

Key Feature

• 100% brand new and good quality
• The output testing voltage can be selected in 600V/500/1000V/2500V for deferent measurement
• Resistance range can touch 20G ohm
• Alternating voltage also can be tested
• This tester apply for all kinds of electric equipment and insulation materials such as transformer, electromotor, cable, switch applicance, etc.
• It is a perfect electrical testing meter

1. Low power consumed CMOS double intergral A/D convertor IC, auto zero
2. 3 digits LCD display, the max reading is 1999
3. Data holding with symbol
4. LED indicating shows high voltage is generated
5. Voltage below AC600V can be tested
6. Low battery indicated
7. Output short current is over 1.5mA
8. Range: 0-2G ohm, auto range
9. Perfect circuit protect
10. Size of LCD: 67*28mm
11. Power: R6P( AA)(1.5V)
12. Size: 150*100*70mm
13. Environment:
Working temperature: 0-40 degrees, relative humidity below 80%
Storage temperature: -10-50 degrees, relative hunidity below 85%
Temperature to ensure precision: 23 degrees to 5 degrees, relative humidity below 75%

Package Including:
1 set Test Lead

Size:150*100*70mm, or 5.91*3.94*2.76in
Net Weight:749g, or 26.42oz

3 in 1 Moisture/Light/PH Meter for Plant Soil Testment

 

Description
 This multi-purpose meter to help provide a healthy growing environment for all plants. Keep houseplants, trees and crops health.It tests your soil value, soil moisture level and sunlight level. It gives instant results, allowing you to choose the proper soil amendments.

Features

• Three in one: moisture light, PH meter, sunlighght
• For outdoor and indoor plants, gardens and grass lawn
• Take the guess work out of your daily garden watering light and moisture
• Save water, energy and keep your plants, lawn, flower in top condition
• Easy to use, just insert and read
• No battery required
• Slide selector switch to the test being performed
• Remove probe from soil and wipe clean after each use

Specification

• Probe Length:205mm, or 8.07in
• Probe Diameter:4.8mm, or 0.19in
• Green Head Size:80*50*38mm, or 3.15*1.97*1.50in
• Net Weight:80g, or 2.82oz
• Gross Weight:96g, or 3.39oz