DC-DC Converter Step Up Module 1-5V to 5V 500mA

• Input voltage: 1V~5V 
• Output voltage: 5V 
• Output Current: 500mA 
• PCB size: 17.55mm*25.22mm*5.85 mm 
• En bloc Size: 17.55*32.53*8.3mm

1. input any DC voltage of 1V~5V, output 5V DC voltage is stable, the input to the output current of 500~600MA with two AA batteries, a single AA battery power supply output current 200ma about for mobile phones camera, single-chip, digital products supply. 
2. high conversion efficiency, up to 96% 
3. ultra-small size, installed in a variety of small equipment 
4. with working lights

SOIC8 SOP8 to DIP8 EZ Programmer Adapter Socket Converter Module

• Programmer(1.27 Pitch) and all SOP8 narrow chips
• Suitable for ALL-11 Series,ALL-100GANG , LT-48 Series, Super PRO Series, TOP Series etc
• Support Chips: 24CXX, 93CXX, 25 Series and all SOP8 narrow chips

PL2303 USB To RS232 TTL Converter Adapter Module

1. Application

• All kinds of satellites set-top box upgrade
• Router,HDD,ADSL,broad band modem firmware upgrade or cracked upgrade
• Cellphone,XBOX360,GPS serial communication,vehicle inspection and test,DVD flash and so on
• Burn write STC MCU,NXP MCU,renesas MCU,NEC MCU and so on
• Simple UART communication,commonly used UART debugging tools in supper terminal
• USB signal transferred to TTL signal,may be used by electronic enthusiasts

2. Features

• Adopt imported controller PL2303HX,which can stabilize the flash with high speed
• 500mA self recovery fuse for protection
• Two data transmission indicator can monitor data transfer status in real time
• Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
• The entire board is coated by high quality transparent heat-shrinkable sleeve,making the PCB in insulation state from outside,
• so that the board won't burnt down by material short cut.
• Electrostatic package,insures the board will not be damaged before use
• Support WIN7 system

USB 2.0 to TTL UART 6 PIN Serial Converter CP2102 STC PRGMR

  

Feature

• This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!
• Stable and reliable chipset CP2102
• USB specification 2.0 compliant with full-speed 12Mbps
• Standard USB type A male and TTL 6pin connector. 6pins for 3.3V, RST, TXD, RXD, GND & 5V
• All handshaking and modem interface signals
• Baud rates: 300 bps to 1.5 Mbps
• Byte receive buffer; 640 byte transmit buffer
• Hardware or X-On/X-Off handshaking supported
• Event character support Line break transmission
• USB suspend states supported via SUSPEND pins
• Temperature Range: -40 to +85
• Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.4