LR35B 315MHz Wireless Receiver Module ICStation

LR35B 4.5-5.5V 315MHz 150m 3.5MA ASK Superheterodyne Wireless Receiver Module:

http://www.icstation.com/lr35b-315mhz-150m-35ma-superheterodyne-wireless-receiver-module-p-9096.html

Product Introduction:

1.Frequency:315Mhz

2.Modulation:ASK

3.Sensitivity:-110dBm

4.Voltage:4.5-5.5V

5.Current:3.5MA

6.Antenna:spring/wire (not included)

7.Size:22*9*5mm

8.Sight Distance:150m



Features:

1.Long Distance

2.High Temperature Withstand

3.Match up with H34B

NodeMCU-32S Lua WiFi IOT Development Board Dual-Core ESP-32S Wireless Module (10381)

NodeMCU-32S Lua WiFi IOT Development Board Dual-Core ESP-32S Wireless Module:

http://www.icstation.com/nodemcu-wifi-development-board-dual-core-wireless-module-p-10381.html 

Description:

 

1. WiFi: 802.11 b/g/n/e/i

2. Bluetooth: BR/EDR+BLE

3. CPU: Xtensa 32-bit LX6 Dual-Core

4. RAM: 520KBytes

5. Input voltage:2.3V~3.6V

 

 

ESP-32S WiFi Bluetooth Module Dual-Core CPU Ethernet Port ESP-32 MCU Low-power Bluetooth ESP-3212(10380)

ESP-32S WiFi Bluetooth Module Dual-Core CPU Ethernet Port ESP-32 MCU Low-power Bluetooth ESP-3212

http://www.icstation.com/wifi-bluetooth-module-dual-core-ethernet-port-power-bluetooth-3212-p-10380.html

ESP-32S Wifi Bluetooth Combo Module

• ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks & Times, abundant peripheral Interfaces and sercurity mechanism.
• ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video steaming for camera, Wi-Fi & Bluetooth enabled devices, Home automation and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides.

ESP32

• ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.
• ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.
• ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.

Key Features:

• CPU and Memory: Xtensa® 32-bit LX6 Dua-core processor, up to 600 DMIPS.
• 448 KByte ROM
• 520 KByte SRAM
• 16 KByte SRAM in RTC.
• QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
• Supply Voltage: 2.2V~3.6V

WIFI

• 802.11 b/g/n/e/i
• 802.11 n (2.4 GHz), up to 150 Mbps
• 802.11 e: QoS for wireless multimedia technology.
• WMM-PS, UAPSD
• MPDU and A-MSDU aggregation
• Block ACK
• Fragmentation and defragmentation
• Automatic Beacon monitoring/scanning
• 802.11 i security features: pre-authentication and TSN
• Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
• Infrastructure BSS Station mode/SoftAP mode
• Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
• UMA compliant and certified
• Antenna diversity and selection

Bluetooth

• Compliant with Bluetooth v4.2 BR/EDR and BLE specification
• Class-1, class-2 and class-3 transmitter without external power amplifier
• Enhanced power control
• +10 dBm transmitting power
• NZIF receiver with -98 dBm sensitivity
• Adaptive Frequency Hopping (AFH)
• Standard HCI based on SDIO/SPI/UART High speed UART HCI, up to 4 Mbps
• BT 4.2 controller and host stack
• Service Discover Protocol (SDP)
• General Access Profile (GAP)
• Security Manage Protocol (SMP)
• Bluetooth Low Energy (BLE)
• ATT/GATT
• HID
• All GATT-based profile supported
• SPP-Like GATT-based profile
• BLE Beacon
• A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
• CVSD and SBC for audio codec
• Bluetooth Piconet and Scatternet

Clocks and Timers

• Internal 8 MHz oscillator with calibration
• Internal RC oscillator with calibration
• External 2 MHz to 40 MHz crystal oscillator
• External 32 kHz crystal oscillator for RTC with calibration
• Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
• RTC watchdog

Peripheral Interface

• 12-bit SAR ADC up to 18 channels
• 2 × 8-bit D/A converters
• 10 × touch sensors
• Temperature sensor
• 4 × SPI, 2 × I2S, 2 × I2C, 3 × UART
• 1 host (SD/eMMC/SDIO), 1 slave (SDIO/SPI)
• Ethernet MAC interface with dedicated DMA and IEEE 1588 suppor
• CAN 2.0
• IR (TX/RX)
• Motor PWM, LED PWM up to 16 channels
• Hall sensor
• Ultra low power analog pre-amplifier

Security

• IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
• Secure boot
• Flash encryption
• 1024-bit OTP, up to 768-bit for customers
• Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number Generator (RNG)

Development Support

• SDK Firmware for fast on-line programming
• Open source toolchains based on GCC

Application

• Generic low power IoT sensor hub
• Generic low power IoT loggers
• Video streaming from camera
• Over The Top (OTT) devices
• Music players - Internet music players - Audio streaming devices
• Wi-Fi enabled toys - Loggers - Proximity sensing toys
• Wi-Fi enabled speech recognition devices
• Audio headsets
• Smart power plugs
• Home automation
• Mesh network

Package List:

1x ESP-32S Wifi Bluetooth Combo Module

NodeMCU-32S Lua WiFi IOT Development Board Dual-Core ESP-32S Wireless Module:

http://www.icstation.com/wifi-bluetooth-module-dual-core-ethernet-port-power-bluetooth-3212-p-10380.html

Thermometer LED Display NTC Metal Waterproof Sensor Module ICStation

0.36Inch Red Electronic Thermometer LED Display NTC Metal Waterproof Sensor DC4-28V

http://www.icstation.com/036inch-electronic-thermometer-display-metal-waterproof-sensor-p-9417.html

 

Product Introduction：

1.Shell Size:32MM*20MM

2.Sensor Type:NTC metal waterproof probe

3.Testing Temperature:-20℃~100℃

4.Testing Precision:-20℃~-10℃,1℃;-10℃~100℃,0.1℃

5.Power Supply Voltage:DC 4-28V  red wire connects with power positive, black wire connects power negative

Test ESP8266 ESP 03 Wireless WIFI to UART ICStation

ESP8266 ESP-03 Remote Wireless Module WIFI to UART Module: 

http://www.icstation.com/esp8266-remote-wireless-module-wifi-uart-module-p-5578.html

Description:

1. Support 802.11 B/G/N

2. Communication range up to 100 yards depending on environment.

3. Standard 3.3VDC operation with 5V compatible I/O.

4. Standard 3 wire (TXD/RXD/GND) serial communication (idle high) at 115200/8/N/1.

5. Standard 0.1" (2.54mm) half through hole.

6. Upgradeable firmware.

7. Three mode of operations: Client/Access Point/Both Client and Access Point.

8. Support all major security schemes: OPEN/WEP/WPA_PSK/WPA2_PSK/WPA_WPA2_PSK.

9. Support both TCP and UDP communication.

10. Working as TCP/UPD server supports up to five (5) connections.

11. Working as station can connect up to 5 TCP/UPD servers. The ESP-04
can connect to all standard non-SSL websites in the world.

12. Simple AT commands for all operations.

13. Connection based data reception or transparent data reception.

14. Programmable client connection inactivity timeout.

15. Automatic domain name address resolution for public domain name but
not the local name within the local area network (router).

Christmas Stock! 25% Off Sitewide with Free Dupont Wire for Your Every Order, 5 Days Left!

Dearest Customer,

It is Time to Stock for Coming Christmas!!! Enjoy 25% Off Sitewide                

from ICStation; And Free Dupont Wire for your Every Order 

Before 31st, Oct.2016.Saving time Now and Thanks for your support.

Details for Surprise from goo.gl/keagSL

Look for your Christmas LED Accessories?

How the Power Charger?

12v 2-Channel 315MHz Wireless Remote Control Module icstation

12V 2 Channel Wireless Remote Control 2 Relay Module Interlock T

Parameter
1. the working voltage: DC12V
2. Working current: ≤9mA
3. Operating frequency: 315MHz
4. the encoding type: Pad
5. Transmission Distance: 200 meters (wide place)
6. the encoding type: fixed code
7. shell color: mahogany
8. vibration resistance: 4.7M

Circuit diagram

Thanks customer for his feedback about this items from icstation: 

"I used a two channel remote to add turn signal lights to a “classic” car without adding wires or modifying any metal.Lights were attached using existing bolt holes and wire routing was done through an existing stiffening channel."

And share his photos with us:

Experiments with a 3-finger claw for claw machine, Parts from ICStation

Partner with Ryan Bates: My never ending quest to build a proper 3-finger claw for my DIY Arduino claw machine. I show the newest design prototype for a claw, plus my thoughts about it and others. To be fair this motor is listed to be used in door locks, hence the speed.

Long Shaft/Thread N20 Micro Grear Motor With Gear Box

$4.99,Save 20% Off, Free Shipping from ICStation.com 

Coupons for ICStation:
Code:Ryaics
Discount Amount: 10%
Max Use: 1 (one for per user)
No Min Order

Ended Date: 26th October, 2016 

Product Introduction:
1.Motor Length:16mm
2.Gear Box Length:9mm
3.Cross Section Specification:12mm*10mm
4.Shaft Extension:M4 55mm

How it works?

Enjoy this Motor With Gear Box