FM Radio - Clock Kit From ICSTATION

LED Alcohol Tester DIY with MQ-3 Sensor - KIT by ICStation

Description: 

• Alcohol concentration alarm circuit This circuit is mainly an alarm control circuit formed by the gas sensor group MQ-3.

• When the sensor MQ-3 is in the environment where alcohol vapor exists, the conductivity of the sensor will be the same as the alcohol vapor concentration.

• By measuring the series partial pressure between the sensor and the fixed resistor, the alcohol content in the environment can be judged.

 

ICStation $18 DIY Bluetooth Speaker Electronics Kit Review

Introduction:
It is a RGB LED Spectrum Bluetooth Audio Speaker DIY Kit with remote control.
It has 10pcs RGB LED music spectrum display.
It can play music form Bluetooth, TF Card, U-disk with 4ohm 2in speakers.
 
Feature:
1.Music spectrum display
2.BLE5.0 Bluetooth audio play
3.Support TF Card and U-disk music
4.Remote controller

Parameter:
1.Item name: RGB LED Spectrum Bluetooth Audio Speaker DIY Kit
2.Work Voltage:DC 3.7V-5V
3.Bluetooth Distance:15meters (Max)
4.Amplifier Power: 3W*2
5.Music Source: Bluetooth/U-disk/TF Card
6.Control Type: Bluetooth/Remote Controller/On Board Button
7.LED Color: Yellow/Green/Red/Blue
8.Work Temperature:-40℃~85℃
9.Work Humidity:0%~95%RH
10.Size(Installed):135*74*64mm

【Bluetooth Amplifier DIY Kit】: The Soldering Project DIY Kits are used to installed to an electronic transparent stereo speaker with high-power speakers, colorful LED flashing lights and transparent Acrylic shell. This Electronic DIY kit help you to learn basic electronic knowledge and circuit principles, and practice soldering skills enjoyably for you and your kids, or students, or DIYers.

【Great Electronic Soldering Project】: Great School Science Experiment and STEM Learning Project kit for soldering practice and also suitable for family education. Not only to improve your soldering skills, you will also will be more familiar with electronic components and learn more interesting electronics things.  

【Easy Installation】:The bluetooth module board is soldered and can be used directly after connection. You only need to solder the Led flashing light kit, connect the wires, and assemble the shell. Fun and entertaining, build your own bluetooth Speaker by yourself, a cool project and challenging enough to be fun.  About power: 5V mobile phone charger or computer power supply can be used, the sound quality will be better when the current of the power supply is 2A.

Download Instruction here:

https://attach01.oss-us-west-1.aliyuncs.com/IC/DIY-Manual/GY19298.pdf

ICStation Weekly New Products: MAX30102 Pulse Oximeter Heart Rate Sensor +5.8G Microwave Radar Sensor

Dear friends,

Hope everything goes well with you! 

Today we are going to introduce 3 of our weekly new products, which was ordered by customers in a short time after sold on the website, hope you will find any of the one that you may like.

No. 1: DAC Digital to Analog Audio Converter Coaxial Toslink to Analog Stereo L/R RCA 3.5mm Jack Audio Adapter with Optical Cable

The device successfully decodes perfectly and sends the audio signal without damage and noise into the audio amplifier! Achieve perfect high fidelity lossless audio output function! Perfect audio visual!

【Updated Digital to Analog Audio Converter】: It converts coaxial or toslink digital PCM/LPCM audio signals to analog L/R RCA and 3.5mm Jack Audio (not capable of being reversed). This Digital to Analog Audio Converter is designed for either home or professional audio switching.

It can be used in digital LED TV / cloud TV / Apple TV / blue ray machine / network player / XBOX360 / computer optical fiber coaxial output sound card / digital set top box / network TV box and other electrical equipment with SPDIF coaxial audio / digital optical fiber audio output equipment which can use this converter to convert to analog audio signal L/R channel output.

【96KHz Sampling Rate】: Supports sampling rate at 32, 44.1, 48 and 96KHz; 24-bit S/PDIF incoming bit stream on left and right channels. Provides electromagnetic noise-free transmission.  

【Easy operation & Wide Application】: With an optical cable and a coaxial cable to transmit digital or analog signals respectively, powered by (5V 1A) USB power cable(Does not come with adapter). Easy to install and simple to operate. 

No. 2: MAX30102 1.8V-5V Pulse Oximeter Heart Rate Detection Sensor

MAX30102 blood oxygen concentration sensor. An integrated pulse oximeter and heart rate monitor biosensor module.

It uses an 18V power supply and an independent 50V power supply for internal LEDs, which are used in wearable devices for heart rate and blood oxygen collection and detection.

No. 3: 5.8G Microwave Radar Module Infrared Human Body Detector

This is an ultra-low power 5.8G microwave radar module with a working current of only 68uA. 

Combines the high performance of microwave induction and the ultra-high cost-effectiveness of infrared induction. 

Its sensing distance and delay time can be adjusted.

It can perfectly replace infrared pyroelectric induction and make up for the lack of infrared induction. 

Thank you for your attention! For more new products, please check ICStation.com:)

Latest Hot Sale New Products!!! FM Radio Wireless Receiver Kits and DC-DC Power Module Recommended!

Dearest Friends,

Much thanks for your support all the way! ICStation has run business for 8 more years now! 2020 is a hard year due to the unexpected COVID-19, many companies closed down, but because of your continues support, we still alive. We still able to provide new products, ship to most of the countries as usual now.

Recently we have some Hot sale new products, especially the FM Radio Kits were very popular and loved by customers. Now Let's look at our latest top 3 new arrivals ! They are might be a nice choice for your new electronics project at the beginning of March! 

DC 4.5V-5.5V 87.0MHz-108.0MHz Wireless FM Radio Receiver DIY Kit

It is an 87.0MHz-108.0MHz Wireless FM Radio Receiver DIY Kit. 

With a built-in 4-Bit Red Digital Tube display screen which can display the receiving frequency clearly.

General Features:

1.Automatically search for radio stations

2.Built-in volume adjustment

3.Automatic memory function after power off

4.Support 87Hz-108MHz receiver frequency

5.Built-in 5W power amplifier

6.Power saving mode with backlight off for 5 seconds

Parameter:

1.Product Name:FM Radio Receiver DIY Kit

2.Work Voltage:DC 4.5V~5.5V

3.Output impedance:8ohm

4.Output power:5W

5.Output channel:Mono

6.Receiver Frequency:87.0MHz~108.0MHz

7.Frequency accuracy:0.1MHz

8.Equivalent noise: >=30dB

9.Work Temperature:-40℃~85℃

10.Work Humidity:5%~95%RH

11.Size(Installed):83*69*53mm

Component List:

Schematic Diagram:

Notice:

1.The frequency can be adjusted continuously by keep press button.

2. It is a wireless module. So do not use it in an environment with signal interference.

3.The display can only show for 5 seconds and then enter to power saving mode.

Using Methods:

1.Press left button to decrease receiving frequency.

2.Press right button to decrease receiving frequency.

3.Rotate potentiometer to adjust the volume.

Installation Steps (Please be patient):

Step 1: Install 1pcs 4.7ohm Metal Film Resistor at R7.

Step 2: Install 1pcs 220Kohm Metal Film Resistor at R3.

Step 3: Install 11pcs 10Kohm Metal Film Resistor at R1,R2,R4,R5,R8~R14.

Step 4: Install 1pcs TEA5767 Audio Receiver at TEA5767.Pay attention to the installation direction.

Step 5: Install 1pcs 13.56MHz Crystal Oscillator at Y1.

Step 6: Install 2pcs 22pF Ceramic Capacitor at C1,C2.

Step 7: Install 1pcs DIP-8 IC Socket at LM386.There is a mark on one end of the IC Socket and there is a mark on PCB where the IC Socket can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC Socket.

Step 8: Install 1pcs DIP-40 IC Socket at U1.There is a mark on one end of the IC Socket and there is a mark on PCB where the IC Socket can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC Socket.

Step 9: Install 1pcs 50Kohm Potentiometer at R6.

Step 10: Install 3pcs 0.1uF Monolithic Capacitor at C4,C5,C6.

Step 11: Install 4pcs TO-92 S9012 Transistor at Q1~Q4.

Step 12: Install 2pcs 10uF 25V Electrolytic Capacitor at C7,C8.Pay attention to distinguish between positive and negative.The Longer pin is positive pole.

Step 13: Install 1pcs Blue 2*5*7 LED at D13.Pay attention to distinguish between positive and negative.The Longer pin is positive pole.

Step 14: Install 1pcs Red 0.56" 4Bit Common Anode Digital Screen at 056SMG_4.Pay attention to the installation direction.

Step 15: Install 1pcs DC-005 Power Socket at 5V.

Step 16: Install 3pcs 100uF 50V Electrolytic Capacitor at C3,C9,C11. Pay attention to distinguish between positive and negative.The Longer pin is positive pole.

Step 17: Install 1pcs Self-locking Button at S4.

Step 18: Install 2pcs 6*6*20mm Black Button at S1,S2.

Step 19: Install 1pcs DIP-8 IC LM386.There is a mark on one end of the IC and there is a mark on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC.

Step 20: Install 1pcs DIP-40 IC STC89C52.There is a mark on one end of the IC and there is a mark on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC.

Step 21: Install 1pcs Antenna at ANT.Note that the antenna should be installed on the back of the PCB.

Step 22: Connect speaker to PCB at SP by 10cm red/black Cable. The speaker does not distinguish between positive and negative.

Step 23: Tear off the protective film on the surface of the acrylic shell.

Step 24: Fixed speaker on acrylic bottom plate by 4pcs M3*8mm Screw and 4pcs M3 Nut.

Step 25: Install 4pcs M3*8mm Screw and 4pcs M3 Nut on PCB.

Step 26: Install 4pcs M3*10mm Copper Pillar on PCB.

Step 27: Install 4pcs M3*8mm Screw and 4pcs M3 Nut on acrylic front plate.

Step 28: Install PCB module on acrylic front plate.

Step 29: Fix other acrylic plate by 12pcs M3*8mm Screw and 12pcs M3 Nut.

Step 30: Connect to power supply and enjoy the effect.

DIY Kit FM Radio Module Adjustable 76-108MHz Wireless Receiver LCD Display DC 3.7V 5W 8ohm Speaker

Feature:

1.HD display LCD display screen

2.Support storage of 22 radio stations

3.Automatically search for radio stations

4.Built-in 30-level digital volume adjustment

5.Automatic memory function after power off

6.Support 76Hz-108MHz receiver frequency

7.Built-in rechargeable module

8.Built-in 5W power amplifier

9.Power saving mode with backlight off for 20 seconds

10.Support speaker and earphone audio output

Parameter:

1. Work Voltage:DC 3.0V~5.0V

2.Output impedance:8ohm

3.Output power:5W

4.Output channel:Mono for speaker and Dual channel for earphone

5.Frequency:87.0MHz~108.0MHz(Disable Campus Broadcasting Band)

6.Frequency:76.0MHz~108.0MHz(Enable Campus Broadcasting Band)

7.Equivalent noise: >=30dB

8.Work Temperature:-40℃~85℃

9.Work Humidity:5%~95%RH

10.Size(Installed):118*87*27mm

Component List:

Schematic Diagram:

Notice:

1.It cannot receive radio while it is charging.

2.It is a wireless module. So do not use it in an environment with signal interference.

3.Input charging voltage form micro USB on the bigger PCB.

Installation Steps:

Step 1: Install 1pcs 39Kohm Metal Film Resistor at R1.

Step 2: Install 2pcs 10Kohm Metal Film Resistor at R2,R3.

Step 3: Install 1pcs SOP-14 IC LM4863 at U1.There is a mark on one end of the IC and there is a mark on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC Socket.

Step 4: Install 1pcs micro USB socket at J2.

Step 5: Prepare 6pcs pin header.

Step 6: Install 1pcs Charging Module at J7 and fix by 6pcs pin header.

Step 7: Remove black fixed block from 6pcs pin header and fix Charging Module.

Step 8: Install 1pcs 0.1uF Monolithic Capacitor at C2.

Step 9: Install 1pcs 1uF 50V Electrolytic Capacitor at C1.Pay attention to distinguish between positive and negative.The Longer pin is positive pole.

Step 10: Install 1pcs 3.5mm Audio Socket at J5.

Step 11: Cut a pin from 16Pin Female Socket.

Step 12: Install Female Socket at FM.Pay attention to the direction of the cut pin.

Step 13: Install 1pcs Self-locking Button at S6.

Step 14: Install 5pcs 6*6*20mm Black Button at S1-S5.

Step 15: Install 1pcs Self-locking Button Cap on Self-locking Button.

Step 16: Install 1pcs Antenna at ANT.Note that the antenna should be installed on the front of the PCB.

Step 17: Install 1pcs 18650 Battery Box at J1,J3.Pay attention to the positive and negative.Red wire is positive pole.

Step 18: Install 2pcs 15cm black Cable on speaker.

Step 19: Connect speaker to PCB at SP. The speaker does not distinguish between positive and negative.

Step 20: Install 1pcs FM Audio Receiver on Female pins.Pay attention to the direction of the cut pin.

Step 21: Tear off the protective film on the surface of the acrylic shell.

Step 22: Install 4pcs M3*15mm Copper Pillar and 4pcs M3*10mm Screw on Acrylic bottom plate.

Step 23: Fixed speaker on acrylic bottom plate by 4pcs M3*6mm Screw.

Step 24: Install 3pcs M3*6mm Screw and 3pcs M3 Nut on Acrylic bottom plate.Note that the wire should not be placed between the PCB and the acrylic.

Step 25: Fixed main PCB on acrylic bottom plate by 3pcs M3 Nut.Note that the wire should not be placed between the PCB and the acrylic.

Step 26: Adjust the position of the battery box. Do not place the wires under the battery box. The wires can be moved to both ends of the battery box.

Step 27: Fix other acrylic plate by 6pcs M3*6mm Screw and 6pcs M3 Nut.

Step 28: Connect to power supply and enjoy the effect.

Use Method:

1.Keep press AUTO button to automatically search and store the radio stations that can be listened to.

2.Automatically name searchable stations like P01,P02,P02 and so on.

3.Press P+ and P- to switch saved stations.

4.Press V+ and V- to adjust volume from V00 to V30.

5.Switch Campus Broadcasting Band: Keep press V+ and V- before power ON and then turn ON work power switch. It means enable Campus Broadcasting Band if display C1 on LCD. It means disable Campus Broadcasting Band if display C0 on LCD.Available after restart.

6.Enable backlight mode: Keep press P+ and P- before power ON and then turn ON work power switch. It means keep backlight ON if display B1 on LCD. It means the backlight will turn OFF after 20second if display B0 on LCD(This is the power saving mode). Available after restart.

7.It can output audio from speaker and earphone jack. The speaker of the module does not work when the earphone is connected.

DC-DC Boost Power Supply Module DC 3V-35V to DC 3.5V-50V 6A 100W High Power Digital Display

Product Introduction:

It is a booster board, the output voltage is greater than the input voltage. When the output voltage is less than 4V, the onboard voltmeter will not work.

Feature:

1.It has a digital display to display voltage.

2.Its conversion efficiency is high.

3.It has an output voltage potentiometer to adjust the voltage in time.

4.It has a display switch button to switch between input voltage display and output voltage display.

Parameter:

1.Product Name:Boost Module

2.Input Voltage:DC 3.3~35V

3.Input Current:9A(Max)

4.Output Voltage:DC 3.5~50V

5.Output Current:6A(Max)

6.Output Power:100W (input voltage greater than 12V can reach the maximum output of 100W)

7.Conversion Efficiency:96%(Max)

8.Output Ripple:40mV(TYP)

9.Range of Onboard Voltmeter:3~55V

10.Work Temperature:-25℃~85℃

11.Work Humidity:5%~95%RH

12.Size:68*42*18mm

Instructions for Use:

1.The voltmeter can be turned off.Press and hold the switch for 4 seconds,and then it can be turned off by letting go.

2.Input and output voltage measurement error calibration function,long press the switch for more than 4 seconds,after letting go,it will enter the voltage measurement error calibration function.

3.The digital tube flashes to display the voltage calibration ratio value (range -5V~5V).At this time,short press the button to change this value (cycle between -5V~5V).

4.When the voltage value displayed by the voltmeter is too high,lower the reference value (adjust to a negative number).

5.When the voltage value displayed by the voltmeter is low,increase the reference value (adjust to a positive number).

6.After adjusting to the reference value you want,press and hold the button for more than 2 seconds. After letting go,save the set value and return to the normal display voltage.The set correction value will take effect immediately and will not be lost after power failure.

Thanks for your time! We will have more new arrivals soon! 

ICStation colorful LED tower display rhythm light kit

Introduction:

1. LED Tower is imitated from Guangzhou Tower. Guangzhou Tower, also known as Guangzhou new TV tower, nickname Xiaoman Yao.

2. It is the tallest building in Guangzhou, the design of the tower is very characteristic, especially in the night under the lighting decoration, very beautiful.

3. Now it becomes a landmark in Guangzhou (a city of China). We combined with the single-chip micro-chip display technology to make the beauty of the Guangzhou Tower.

4. Using STC12C5A60S2 as a control system, the display part is 16*16 dot matrix display, through the production of the Guangzhou Tower, can better enhance the microcontroller on the principle of dot matrix display.

Application:
1.Home Furnishing decoration
2.Store decoration
3.Graduation design
4.Practice for electronic enthusiasts
5.Holiday gifts

http://www.icstation.com/colorful-tower-display-rhythm-lamp-light-with-infrared-remote-control-electronic-kits-brain-training-gifts-p-12320.html

New ESP Wireless WIFI Transceiver Modules Recommended

Dearest Friends,

Thank you very much for reading this article.

Recently we have some New Products about ESP module. Some of them are really popular with good price. Hereby, we would like to recommend some of them to you, which might be a good choice for you to start new project in the beginning of 2020.

No.1# ESP8266 0.96 Inch OLED Weather Clock Display RTC ESP-12F Wireless WIFI Transceiver Module

1.Description:

  It is a RTC Weather ESP8266 0.96inch OLED Display Module. It can display current time and weather on OLED display screen.

 

2.Feature:

  1>.Built-in ESP-12F WIFI Module

  2>.Built-in 4M BYTE FLASH

  3>.IIC 0.96in OLED Display Screen

  4>.Built-in Clock chip

  5>.Reserved UART interface

 

3.Parameter:

  1>.Work Voltage:DC 5V

  2>.OLED Driver IC:SSD1306

Discount Price: $6.99.

Click here to know more info about this item: ESP8266 0.96 Inch OLED Display Module 

No.2# Infrared Transceiver ESP8285 Wireless Transceiver Module WIFI Remote Control Switch

1.Description:

  It is a Infrared ESP8285 Wireless WIFI Transceiver Module. The esp-01m module with ESP8285 as the core be used as the master control, the program is the same as ESP8266. The module is equipped with an infrared receiving tube and an infrared transmitting tube which are respectively io14 and io4 controlled, and a burning port sets apart.

 

  The demonstration program can read and emit infrared key values and raw codes, user can record infrared remote controls in your home , which can be controlled remotely if connected to the Internet of things platform.

2.Feature:

  1>.Support Infrared control

  2>.Support wireless WIFI control

  3>.Support firmware update

  If you are interested in it, click here for more info and get it at $4.19 : Infrared ESP8285 Wireless WIFI Transceiver

No.3# ESP8266 WIFI Wirelesss Transceiver Module Support Airkiss Protocol UART TTL Control

1.Description:

  It is a ESP8266 WIFI Wirelesss Transceiver Module. It based on ESP8266EX controller, supports data transparent transmission function and Airkiss protocol.

 

2.Feature:

  1>.UART to WIFI data transparent transmission

  2>.Support STA,AP and WIFI mode

  3>.Low power consumption

Click here and get it at $4.19: ESP8266 WIFI Wirelesss Transceiver

Not the one you are looking for? It doesn't matter!

ICStation will have 5-10 New products per week.  And each week we will have promotion activies to thanks for all of your support and attention. Please continue to support us in the future:)

By the way, we'll be 10 days off for the holiday from Jan 23rd-Feb 1st. All your emails and orders will be disposed when we back to work on Feb 2nd. Thanks for your support and enjoy your shopping as usual ^0^