10A 12V 120W SMPS Regulated Switching Power Supply Driver

1.DC output voltage: 12V
2.Output Voltage Tolerance (Note 2): ± 1%
3.Rated output current: 10A
4.Output current range :0-10A
5.Ripple and noise (Note 3): 100mVp-p
6.Line Regulation (Note 4): ± 0.5%
7.Load stability (Note 5): ±0.5%
8.DC output power:120W
9.Efficiency: 85%
10.DC voltage adjustable range: ±20%
11.Input voltage range: 220V/AC 110V/AC
12.Inrush current: Cold start 18A/115V 36A/230V
13.Leakage current: <0.5mA/240VAC
14.Overload protection: 105% ~ 150% Type: TOLDBACK Reset: auto recovery
15.Overvoltage protection:
16.The high temperature protection: Yes (Built-in thermal)
17.Temperature Coefficient: ±0.03% ℃ (0 ~ 50 ℃)
18.Setup rise hold up time: 200ms, 100ms, 30ms
19.Shock resistance: 10 to 500Hz, 2G 10min. / Cycle time is 60 minutes long, each axis
20.Pressure: between input and output: 1.5KVAC, Input and enclosure: 1.5KVAC output shell: 0.5KVAC
21.Isolation resistance: input and output, input and enclosure, Output and enclosure: 0500VAC/100M Ohms
22.Operating temperature and humidity: -10 ℃ ~ +60 ℃, 20% ~ 90% RH
23.Storage Temperature temperature: -20 ℃ ~ +85 ℃, 10% ~ 95RH
24.Dimensions: 129 * 98 * 40mm
25.Safety standards: meet UL1012 requirements
Note: 1.The above parameters test conditions: 230VAC input, rated load, 25 ℃ 70% RH. Humidity.
2. Tolerance: includes set up tolerance, line stability and load stability (Note 5).
3. the ripple test: 15MHz with A12 "twisted pair, interrupted with 0.1uF & 47uF capacitor short-circuit.
4. the line voltage stability test: full load into the line to the highest voltage minimum voltage.
5. load stability test: The load is from 0% to 100%. 

Size: