Free Samples From ICStation

ENC28J60

http://www.icstation.com/enc28j60-network-module-channel-network-contrller-smart-home-p-6027.html

Looking forward to ICStation's Partner Luis's awesome project!

Get Free samples from ICStation:
http://www.icstation.com/makerspace.php

LAST 24Hrs!!! Icstation 30% OFF Sitewide Black Friday SALE!!!

Dear Customer, 

NOTING that Icstation Black Friday 30% OFF SITEWIDE Lasting 24Hrs Now!!! 

Biggest Discount Once A Year. Seize Chances and Win Free Bill from Us. 

Welcome to Icstation and Save Time From Now On. 

Recommendation Best Sellers: 

MP3 Decoder Board Decoder Module Key Control For Electric Components

24HRS Left For 30% OFF Sitewide From Now ON!!!

1.Name:WAV+MP3 decode board
2.Board Length:52.97mm
3.Board Width:15.90mm (not include key)

TDA7297 Amplifier Board Dual Stereo Module DC 12V 15W+15W

24HRS Left For 30% OFF Sitewide From Now ON!!!

1.Specification:33x29x25mm
2.Voltage:DC 9-15V
3.Power:15W+15W
4.Output Impedance:4-8 ohm

ISD1806 Voice Module 6s Sound Record Module 0.25W-2W 3-4.5V 8 ohm

24HRS Left For 30% OFF Sitewide From Now ON!!!

1.Voltage:3-4.5V
2.Driving Loudspeaker:0.25-2W/8 ohm
3.Size:20.20*16.70*1.00mm

Pinboard Converter For ESP-32S Wireless WIFI Module

24HRS Left For 30% OFF Sitewide From Now ON!!!

1.Name:ESP-32S pinboard
2.Pin Space:2.54mm

Much thanks for your support if Icstation.com. 

If you have any questions, plz feel free to contact me via 

Facebook: https://www.facebook.com/ICStation2013/

Google+: https://plus.google.com/u/0/105092859818673892725/posts

Connect AD7606 8 Channel 16 Bit ADC in 16 bit parallel mode

AD7606 DATA Acquisition Module 200Ksps 16Bits ADC 8CH Synchronization

http://www.icstation.com/ad7606-data-acquisition-module-200ksps-16bits-synchronization-p-7367.html 

Description
1. using high-precision 16-bit ADC chip AD7606
2. 8 analog inputs. 1M ohm impedance. [No negative supply, there is no front-end analog amplifier can be connected directly to the sensor output]
3. the input range of plus or minus 5V, plus or minus 10V. By IO control.
4. Resolution 16.
5. the maximum sampling frequency sampling rate of 200ksps. Supports eight sampling settings file (which can effectively reduce the jitter)
6. built-in benchmark
7. a single 5V power supply
8. SPI Interface, or 16-bit bus interface. Interface IO level can be 5V or 3.3V.

 

We AD7606 module factory default is 16bit parallel interface.
 If SPI interface mode, you need to modify R1 R2 resistor configuration.
(8080 8bit)Parallel Mode Jumper: R1 floating (not stickers), R2 10K resistor paste
 SPI interface mode jumper: R1 floating (not stickers), R2 10K resistor paste
    AD7606 configuration is very simple, it has no internal registers. Range and over-sampling parameters are controlled via an external IO.
    Pulse frequency sampling rate provided by the microcontroller or DSP control.
    AD7606 must use a single 5V supply.
    Level communication interface between the AD7606 and SCM controlled by VIO pin. That VIO power supply must be connected to the microcontroller can be 3.3V can also be 5V.

 

Module Pin Description
OS2 OS1 OS2: a combination of state selection oversampling mode.
000 means no oversampling, the maximum sampling rate of 200ksps.
001 represents two times oversampling, which is the hardware inside collected two samples averaging
010 represents four times oversampling, which is the hardware inside collect four samples averaged
011 represents eight times oversampling, which is the hardware inside collected eight samples averaged
100 represents 16 times oversampling, which is the hardware inside collected 16 samples averaged
101 represents 32 times oversampling, which is an internal hardware averaging collected 32 samples
110 represents 64 times oversampling, which is the hardware inside collected 64 samples averaged

 

Oversampling ratio is higher, the longer the ADC conversion time, the lower the maximum sampling frequency can be obtained.
CVA, CVB: AD conversion start control signal channel 1-4 decision CVA, CVB decided 5-8 channels.
Two signals can stagger a short time, in general, can be CVA, CVB parallel together.
RAGE: Select the range of 0 means plus or minus 5V, 1 indicates negative 10V.
RD: Read signal
RST: Reset signal
Busy: Busy Signal
CS: chip-select signal
FRST: first a channel samples indicating signal
VIO: communication interface level
DB0 - DB15: Data Bus
[16 parallel mode wiring diagram --- AD7606 also supports 8-bit bus mode, see the AD7606 data sheet
 MCU side AD7606 module
GND <----- ground
+5 V <----- 5V power supply
RAGE <----- can also be connected to the GPIO connected fixed level
OS2 <----- can also be connected to the GPIO connected fixed level
OS1 <----- can also be connected to the GPIO connected fixed level
OS0 <----- can also be connected to the GPIO connected fixed level
CVA <----- access the GPIO (output) is used to start AD conversion [Recommended pick pin with PWM output capability]
CVB <--- |
RD <----- 8080 bus read signal NOE
RST <----- GPIO output hardware reset AD606
Busy -----> GPIO input AD606 being converted instructions. [Recommended connection with external pin interrupt capability]
CS <----- 8080 bus chip select NCS
VIO <----- microcontroller power supply
DB0-DB15 -----> 8080 data bus (16)
FRST may take
[SPI interface mode wiring diagram
MCU side AD7606 module
GND <----- ground
+5 V <----- 5V power supply
RAGE <----- any output GPIO, can be accessed by a fixed level
OS2 <----- any output GPIO, can be accessed by a fixed level
OS1 <----- any output GPIO, can be accessed by a fixed level
OS0 <----- any output GPIO, can be accessed by a fixed level
CVA <----- access the GPIO (output) is used to start AD conversion [Recommended pick pin with PWM output capability]
CVB <--- |
RD / SCLK <----- SPI bus clock SCK
RST <----- any output GPIO, for hardware reset AD606
Busy -----> GPIO input, AD606 being converted instructions. [Recommended connection with external pin interrupt capability]
CS <----- SPI bus chip select SCS
VIO <----- microcontroller power supply
DB7 (DOUTA) -----> SPI bus data lines MISO
DB14 - DB15 may pick
FRST may take

Reviewed by ICStation's Partner Boian Mitov
https://www.hackster.io/mitov/connect-ad7606-8-channel-16-bit-adc-in-16-bit-parallel-mode-4a6cfc

AD7606 DATA Acquisition Module 200Ksps 16Bits ADC 8CH Synchronization

http://www.icstation.com/ad7606-data-acquisition-module-200ksps-16bits-synchronization-p-7367.html

 

 

OPT101 Analog Light Sensor Module Light Intensity Module Monolithic Photodiode

http://www.icstation.com/opt101-analog-light-sensor-module-light-intensity-module-monolithic-photodiode-p-8884.html

Features;
1.Single Supply:2.7-36V
2.Photodiode Size:2.29mm*2.29mm
3.Internal 1Mohm Feedback Resistor
4.High Responsivity:0.45A/W(650nm)
5.Bandwidth:14Khz
6.Low Qulescent Current:120UA
7.Packages:Clear plastic 8-pin PDIP and J-Lead SOP

Applications;
1.Medical Instrumentation
2.Laboratory Instrumentation
3.Position and Proximity Sensors
4.Photographic Analyzers
5.Barcode Scanners
6.Smoke Detectors
7.Currency Changers

Description:
    The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier.The ingrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance.Output voltage increases linearly with light intensity. The amplifier is designed for singlr or dual power-supply operation. 

ICSTATION 30% OFF SITEWIDE for Black Friday 2016 Killer Sale!!!

Dearest Customer,

Welcome to ICStation Black Friday BIG SALE:30% OFF SITEWIDE FREE SHIPPING!!!
Surprise Once A Year!!! Come and Get Your Items ^0^ More Surprises Coming Soon!

Funduino Mega 2560 ATmega2560-16AU R3 Board
31% Off free shipping from goo.gl/kKwBjZ
Enjoy video from https://www.youtube.com/watch?v=CqE_dSyXut4

D2-3 Tracking Obstacle Avoidance Smart Car 

NOTE:Package does not contain battery, the picture is only for reference demonstration effect!!

$9.99 free shipping from icstation.com Black Friday Recommendation!!! 

2.4G 22dBm 100mW nRF24L01P+PA+LNA Wireless 

Features：With shielding cover, Strong anti-interference force

$6.75+Free shipping from www.icstation.com 

Enjoy video from https://www.youtube.com/watch?v=bjsxrnT3j2c

 

More Surprises from www.icstation.com, Hope you like and thanks for your support ^0^

What's More, Black Friday Sale for Arduino!!! Up to 35% Off From ICSTATION.COM 

DC-SSR Microwave Module Microwave Sensor Switch Radar Switch Module

http://www.icstation.com/microwave-module-microwave-sensor-switch-radar-switch-module-p-8964.html


DC-SSR Microwave Module Microwave Sensor Switch Radar Switch Module Body Induction Switch
Parameter:
1.Model:XZG-LDK-6
2.Input Voltage:3.7-12V
3.Output Voltage:3.7-12V
4.Maximum Load Current:3A
5.Maximum Load Power:30W (driving LED should less than 20W)
6.Sensing Distance:5m (customizable, the longest distance is 10m)
7.Delay Time:default 10 seconds (customizable)
8.Accessible to install photoresistance (need to customize,default no photoresistance)

Notice:
1.Don't operate during the power on;don't connect the wrong wire;don't overload and short circuit;please read the instruction carefully before using
2.Don't use it to overload power
3.When the wall thickness is smaller than 10cm,this switch may sensor throughout the wall
4.Don;t put any objects that may affect its detection or keep on moving
5.Don't take shakable object as install basement
6.Short-distance microwave signal and other superstrong magnetic radiation source may influence the normal operation og radar switch
7.Owing to the difference of sensoring distance,the matching antenna model may be different when customization

http://www.icstation.com/microwave-module-microwave-sensor-switch-radar-switch-module-p-8964.html

ICSTATION BLACK FRIDAY KILLER DEAL!!!

Dear friends and customers,

Black Friday 2016 is Coming Soon.Thanks for your all Support and Likes of Icstation ^0^ We have prepared The Killer Deal for you for Black Friday & Cyber Monday. Hope you will Like Them. Are YOU Ready? Plz Keep An Eye On our Official Blog and Official Website: www.Icstation.com The Latest News will be Posted Soon.

Will You be The Lucky one to Win our Mysterious Surprise?

Will You come to our Community and Share your projects with us? 

Icstation Waiting for your Come and likes always ^0^ 

Wanita From ICStation.com 

Raspberry Pi Zero Internet Radio Player from ICStation com 1857

2.5-5V 2X3W Mini Audio Class D Amplifier Board

http://www.icstation.com/2x3w-mini-audio-class-amplifier-board-p-1857.html

Features:

• dvanced Micro Devices, volume: 1.85 * 2.11cm
• Excellent
  noise suppression in the case is not connected to the input audio, the
  ear close to the speaker can not hear any noise
• Two-channel
  stereo, 5V power supply can output 3W +3 W power, can directly drive 4Ω
  8Ω small speaker output power, full of energy, good sound quality.
• Unique without LC filter Class D digital power board, and can be used directly to the computer's USB powered.
• Dual-panel wiring, properly solve the crosstalk between the ground potential balance and channel wiring
• Ultra-miniature
  design, can easily be placed in the internal space for a variety of
  digital products, ultra high zoom efficiency.
• All using the machine for the entire board soldering, hand soldering iron welding quality comparable!
• Rated working voltage 2.5-5V, limit operating voltage 5.5V.

Note:  The left and right channel output of the "negative" can not connect each other,otherwise it will burn the IC and install speaker before  input power

Pocket Power Supply with ICStation parts 2455

ICStation DIY Kit LT1083 Adjustable Regulated Power Supply Module

http://www.icstation.com/icstation-lt1083-adjustable-regulated-power-supply-module-p-4322.html

LT1083 adjustable regulated power supply module is based on low
three steadied chip LT1083 adjustable regulated power supply module.

A. Principle

   Circuit mainly has four 10 a10 rectifier diode, rectifier
circuit, composed of 50 v / 4700 uf capacitance, TL1083, adjustable
voltage regulator circuit, composed of W502 potentiometer, and 7 a self
recovery fuse output circuit

   1. The four 10 a10 rectifier diode, converting ac power to dc power supply, through 50 v / 4700 uf capacitor filter

   2. By adjusting W502 potentiometer, can adjust LT1083 output voltage

   3. 7A self recovery fuse, can prevent the output of the circuit is too large, with output protection function

DIY plant watering system with solenoid valve and PIC microcontroller IC...

DC 12V Electric Solenoid Valve Normally Closed N/C Water Inlet Flow Switch

http://www.icstation.com/electric-solenoid-valve-normally-closed-water-inlet-flow-switch-p-8775.html

Application:
Applied in a self-control system: the Solar energy turn on the water
automatically; the infrared sensor sanitary ware,shower, water control
machine, water vending machine, water boilers, campus Card switch
control device, The angel of the inlet and outlet ports are180°, called
straightway check valve or straight line valve!

 Common solenoid valve parameters are as follows：
1, Normally closed (energized open)
2, Inlet valve(operating pressure, 0.02-0.8MPaGeneral access to water
or booster pump, more convenient with higher pressure) Drain
valve(operating pressure,Generally used in bottled water switch)
3, Mounting angle: Parallel(180°)
4, Interface: An outer diameter of 12mm
5, Voltage: DC12V, DC24V, AC220


Operating parameters:
⑴Rated operating voltage: Direct-current DC12V. DC24V. alternating
currentAC220Vetc(used to dectect the voltage fall in production
line 15%) ; Power level: 4W/5W/etc;

⑵Operating Current

16x16 LED Lattice Module Dot Matrix from ICStation Cветодиодный LED моду...

16x16 LED Lattice Module Dot Matrix Subtitle Text Display HT1632C 3.75mm Red

http://www.icstation.com/16x16-lattice-module-matrix-subtitle-text-display-ht1632c-375mm-p-8892.html

Product Parameter:

1.Name:16x16 lattice module

2.Model:NO.2013410

3.Function:lattice display,subtitle display

4.Specification:75.6mmx75.6mm

5.Drive Voltage:2.4V-5.5V

6.Operating Temperature:0-45℃

7.Light Intensity:can be set

8.Power Consumption:<1.2W


Features:

1.16x16 line lattice module

2.Original HT1632C special driving chip

3.Serial port driving, can save SCM interface

4.Static display, does not need real-time scanning

5.Support multi-board parallel and series, can achieve seamless spline

6.3.75mm high-quality LED module

7.Have perfect driving program.

Measuring Distance with Raspberry Pi and HC SR04 Utrasonic Sensor from I...

For Arduino Ultrasonic Module HC-SR04 Distance Transducer Sensor

http://www.icstation.com/arduino-ultrasonic-module-sr04-distance-transducer-sensor-p-1389.html 

1. Product feature
HC-SR04
ultrasonic module can offer non-contact distance sensing function with
the range of 2cm - 400cm. And the range accuracy is up to 2mm. This
module includes ultrasonic transmitter, receiver and control circuit.

2. Module technical parameters

• Working Voltage : 5V(DC)
• Static current: Less than 2mA.
• Output signal: Electric frequency signal, high level 5V, low level 0V.
• Sensor angle: Not more than 15 degrees.
• Detection distance: 2cm-450cm.
• High precision: Up to 0.3cm
• Input trigger signal: 10us TTL impulse
• Echo signal : output TTL PWL signal

LB3256 bluetooth module from ICStation

DC 2.8-4.2V LB3256 Bluetooth Stereo Module Audio Transceiver

http://www.icstation.com/lb3256-bluetooth-stereo-module-audio-transceiver-p-9100.html 

Product Introduction:

1.Bluetooth Specification: Bluetooth v2.1+EDR

2.Power Supply Voltage:DC 2.8-4.2V

3.Support Bluetooth Protocol:HFPV1.5,A2DPV1.2,AVRCPV1.4,HSP1.2,GAVDP1.2,IOP

4.Operating Current:no more than 45MA

5.Standby Current:less than 500UA

6.Wireless Transmission Range:more than 10m

7.Temperature Range:-40℃～85℃

8.Transmission Power:CLASS2,4dbm

9.Sensitivity:-80dBm

10.Frequency Range:2.4GHz-2.480GHz

11.External Interface:I2C,SPI and UART interface

12.Audio Performance:SBC decoding

13.Audio Signal Noise Rate:more than 90dB

14.Size:25*13.5*1.8mm

HMC5883L sensor on GY 80 10DOF Module ICStation

10DOF 9 Axis Attitude Indicator L3G4200D ADXL345 HMC5883L BMP085:
http://www.icstation.com/10dof-axis-attitude-indicator-l3g4200d-adxl345-hmc5883l-bmp085-p-1646.html

Description
Nine axis modules (three-axis gyro + three axis acceleration + tri-axial magnetic field +BMP085 )
Using immersion gold plating PCB process
Module chips: L3G4200D+ADXL345+HMC5883L+BMP085
Power supply: 3V-5V
Communication mode: IIC communication protocol (fully compatible with 3-5V systems, including LLC circuit)
Board size: 25.8mm*16.8mm
The default with pin, straight and curved, no welding

ICStation LED Heart Kit and EV1527 Rolling Code Transmitter

DIY Kit Heart-shaped LED Flash Light

http://www.icstation.com/heart-shaped-flash-light-p-3289.html 

Listing

• PCB board x1
• Red yellow and green LED 6*3
• Resistor 100ohm x3
• Resistor 10K x3
• Transistor 9014 x3
• 47UF capacitor x3
• AA*3 battery box x1

CNS-X2 433Mhz Wireless Transmitter EV1527 Code Encoded for Arduino/AVR

http://www.icstation.com/433mhz-wireless-transmitter-ev1527-code-encoded-arduinoavr-p-7518.html 

 

Descrption:

1. Transmission frequency: 433.92MHZ

2. Operating Voltage: DC 3V -12V

3. Modulation: ASK

4. Quiescent Current: 0uA

5. Working current: 8-10mA

6. Code Type: Learning code (eV1527)

7. Radiation power: 10-15mW

8. Transmission Distance: 100-200 meters (receiver sensitivity of -108dBm)

Application:

1. The long-distance wireless remote control;

2. All kinds of anti-theft alarm system;

3. A variety of low-rate wireless transmission of digital signals;

4. All kinds of household appliances, intelligent toys, remote control, etc.

Cyrob Le capteur de lumière OPT101 Analog Light Sensor Module ICStation

OPT101 Analog Light Sensor Module Light Intensity Module Monolithic Photodiode

http://www.icstation.com/opt101-analog-light-sensor-module-light-intensity-module-monolithic-photodiode-p-8884.html 

Features;
1.Single Supply:2.7-36V
2.Photodiode Size:2.29mm*2.29mm
3.Internal 1Mohm Feedback Resistor
4.High Responsivity:0.45A/W(650nm)
5.Bandwidth:14Khz
6.Low Qulescent Current:120UA
7.Packages:Clear plastic 8-pin PDIP and J-Lead SOP

Applications;
1.Medical Instrumentation
2.Laboratory Instrumentation
3.Position and Proximity Sensors
4.Photographic Analyzers
5.Barcode Scanners
6.Smoke Detectors
7.Currency Changers


Description:

The OPT101 is a monolithic photodiode with on-chip transimpedance
amplifier.The ingrated combination of photodiode and transimpedance
amplifier on a single chip eliminates the problems commonly encountered
in discrete designs, such as leakage current errors, noise pick-up, and
gain peaking as a result of stray capacitance.Output voltage increases
linearly with light intensity. The amplifier is designed for singlr or
dual power-supply operation. 

SIM800C for Arduino STM32 with Bluetooth and TTS With Voice Reply ICStation

SIM800C GSM GPRS Module for Arduino STM32 C51 with Bluetooth and TTS:

http://www.icstation.com/sim800c-gprs-module-arduino-stm32-with-bluetooth-p-8552.html

Description:

Power input: DC5V or received by a lithium battery input VBAT and GND.

Supports MCU level: 5V / 3.3V for TTL logic (Such as the common 51 and the arduino is 5v, STM32 is the 3.3v)

Antenna use: IPEX antenna interfaces, you can use the version PCB antenna or antenna IPEX-SMA- peppers


Pin Description:

5V: power supply pin, the only input DC5V, used to power the board.

V_TTL: access control board microcontroller core target voltage of 5V /
3.3V (according to its own microcontroller is much to distinguish
kernel v), this pin is used to convert the GSM module board TXD and RXD
for the corresponding TTL logic.

GND: power supply ground

TXD: send pin serial port module, TTL level (not directly connected to RS232 level)

RXD: receive pin serial port module, TTL level (not directly connected to RS232 level)

DTR: Data Terminal Ready

SPKP: Core Audio output pin

SPKN: Core Audio output pin

MICN: Core Audio input

MICP: Core Audio input

RI: Ring core pin tips

VRTC: RTC pin external battery

GND: power supply ground

PWR: This pin can turn down or turn off the module

GND: power supply ground

VBAT: lithium battery input pin, 3.3v-4.4v

1 8' ST7735 Display and DIY MP3 player Modules ICStation

1.8" 1.8in 128*160 SPI TFT LCD Module Colorful Display + PCB adapter 

http://www.icstation.com/18in-128160-module-colorful-display-adapter-p-8397.html

Description:

1. Adopts ST7735 drive chip

2. 128*160 resolution rate;

3. 260K true color display

4. Display ASCII, graphics in high contrast ratio

5. Large visual angle

6. Adopts I2C serial communication